A_Service - tabular view

No Current Link To VocabularyCoded With ExtensionsCoded No Extensions
UKCT_RM144047UK01
Service
A service which was or is planned to be provided.
Used by:
[1..1] [M] classCode (CS {CNE:ActClass } ) { Fixed="PCPR" }
Indicates that this is a care provision.
[1..1] [M] moodCode (CS {CNE:x_ActMoodIntentEvent } )
The mood code of the service.

The Coded Only datatype flavour is used to carry this information and should be used as follows:

  • The code attribute should be set according the context of the information being conveyed and will be selected from the vocabulary.
[1..1] [M] code (CD {CNE:ServicesSnCT } )
A SNOMED CT code taken from the subset shown.

The Concept Descriptor (CD) datatype shall be used to carry this information as follows:

  • The code attribute shall contain acode from the relevant vocabulary.
  • The code System attribute shall containthe OID for SnomedCT.
  • The displaytext shall carry a description associated with the codein SnomedCT.
  • the original text attribute may be used if required.
  • qualifier (s) may be used if required.

The use of the SNOMED CT terms in this subset are for guidance purposes only. Codes outside this subset may be used at clinical discretion. There will be codes in the subset which are unsuitable.

The content of this subset will change in response to user requirements
[1..1] [R] effectiveTime (IVL<TS>)

The low attribute (mandatory) should be used to state when a service has begun or is planned to begin.

The high attribute (optional) should be used to state when the service finished or is planned to finish.

The centre attribute should not be used.

If both a start date and an end date are present the Date or Time Interval Complete data type shall be used:
  • The low attribute shall contain the start date.
  • The high attribute shall contain the end date.
If only a start date is present the Date or Time Interval After data type shall be used:
  • The low attribute shall contain the start date.
If only an end date is present the Date or Time Interval Before data type shall be used:
  • The high attribute shall contain the end date.
[1..1] [M] id (II)
This is a unique identifier for this instance of a Service.

The Identifier Global datatype flavour is used to carry the identifier as follows:

  • The root attribute shall contain a DCE UUID.
[1..1] [M] statusCode (CS {CNE:ActStatus } ) { Default="normal" }
The status of the Service.

The Coded Only datatype flavour is used to carry this information as follows:
  • The code attribute will contain a one of the following codes from the Act Status vocabulary:
    • normal
    • nullified
    • active
    • completed
    • aborted
[0..1] author

Refers to the person who is the author of the act.

Constraint: This author is only required if the author or author time is different from the inherited author.


[1..1] [M] typeCode (CS {CNE:ParticipationType } ) { Fixed="AUT" }
Indicates that the role is that of author.
[1..1] [M] contextControlCode (CS {CNE:ContextControl } ) { Fixed="OP" }
Specifies how this participation contributes to the context of the current act and whether it may be propagated to descendent acts whose association allows such propagation.

"O" (Overriding)- the association replaces any context of the same or more specific type that has been conducted from the parent act.

"P" (Propagating)- the association is conducted to all child acts where the ActRelationship.contextConductionInd is set to "true."
[0..1] [R] time (TS)

The time at which the author participated.

[1..1] participant (RoleChoice)
The person who participates in the role of author.
[0..1] performer
Refers to a performer of the act.

Where performer participation is used, then all performers must be stated, even if they authored the act.

Where the author did not perform the act then the performer(s) should be explicitly stated.
[1..1] [M] typeCode (CS {CNE:ParticipationType } ) { Fixed="PRF" }
Indicates that this is a performer.
[1..1] [M] contextControlCode (CS {CNE:ContextControl } ) { Fixed="OP" }

Specifies how this participation contributes to the context of the current act and whether it may be propagated to descendent acts whose association allows such propagation.

"O" (Overriding)- the association replaces any context of the same or more specific type that has been conducted from the parent act.

"P" (Propagating)- the association is conducted to all child acts where the ActRelationship.contextConductionInd is set to "true."
[0..1] modeCode (CS {CNE:ParticipationMode } )
The mode in which the participant participated in the Service.

The Coded Only datatype flavour is used to carry this information as follows:

  • The code attribute will contain a value from the list of codes in theParticipationMode vocabulary.
[1..1] [R] participant (ServicePerformerChoice)
The person who participates in the role of performer.
[0..1] pertinentInformation
Indicates pertinent supporting information.
[1..1] [M] typeCode (CS {CNE:ActRelationshipType } ) { Fixed="PERT" }
Indicates pertinent information.
[1..1] [M] contextConductionInd (BL) { Fixed="true" }
Indicates that the associations in the source act are conducted across the ActRelationship to the target act.
[1..1] [M] seperatableInd (BL) { Fixed="false" }
Indicates that the source act and the target act are not meant to be interpreted independently.
[1..1] pertinentSupportingInfo (SupportingInfo)
Link to the details of SupportingInformation.
[0..1] responsibleParty
Refers to the person who is a responsible party in the service.
[1..1] [M] typeCode (CS {CNE:ParticipationType } ) { Fixed="RESP" }
Indicates that the role is that of a responsible party.
[1..1] [M] contextControlCode (CS {CNE:ContextControl } ) { Fixed="OP" }
Specifies how this participation contributes to the context of the current act and whether it may be propagated to descendent acts whose association allows such propagation.

"O" (Overriding)- the association replaces any context of the same or more specific type that has been conducted from the parent act.

"P" (Propagating)- the association is conducted to all child acts where the ActRelationship.contextConductionInd is set to "true."
[0..1] modeCode (CS {CNE:ParticipationMode } )
The mode in which the participant participated in the service.

The Coded Only datatype flavour is used to carry this information as follows:

  • The code attribute will contain a value from the list of codes in theParticipationMode vocabulary.
[1..1] role      [CMET: UKCT_MT160017UK01]
The organisation who participates in the role of responsible party.
RoleChoice
The person performing this participation.
Used by: Service
[1..1] either : UKCT_MT160018UK01
A CMET to identify a person on SDS or provides detailed information for a person not registered on SDS.
             ... or ... : NonAgentRole
The participating person.
NonAgentRole
A role played by a person who is not an agent (i.e. not a care professional).
Used by: Service,RoleChoice
[1..1] [M] classCode (CS {CNE:RoleClass } ) { Fixed="ROL" }
Indicates this is a role.
[1..1] [M] code (CV {CNE:PersonRelationshipType } )

A code identifying the relationship of the non-agent person to the patient, e.g. parent or carer.

The Coded Plain flavour of the Coded Value (CV) datatype shall be used to carry this information as follows:

  • The code attribute shall contain a value from the list of codes in the vocabulary
  • The code System attribute shall contain the OID for the vocabulary
  • The display text attribute will carry a description for the code from the vocabulary.
[0..1] id (II)
An optional unique identifier of the role-player. May be used to convey the NHS number of a patient who is playing a role. It shall be an OID for the identification scheme and the identifier within that scheme (e.g. for patient NHS number).
[0..1] playingNonAgentPerson (NonAgentPerson)
A link to the person playing the non-agent role.
NonAgentPerson
Details of the non-agent person (i.e. not a care professional).
Used by: NonAgentRole
[1..1] [M] classCode (CS {CNE:EntityClass } ) { Fixed="PSN" }
Indicates this is a person.
[1..1] [M] determinerCode (CS {CNE:EntityDeterminer } ) { Fixed="INSTANCE" }
Indicates that the entity is a single identifiable person.
[1..1] [M] name (SET<PN>)
The name(s) of the person.
ServicePerformerChoice
Choice of person who participates in the role of performer.
Used by: Service
[1..1] either : UKCT_MT160018UK01
A CMET to identify a person on SDS or provides detailed information for a person not registered on SDS.
             ... or ... : NonAgentRole
The participating person.
SupportingInfo
An Act holding overflow information from the Act acting as the root of the clinical statement . Supporting informationshall not contradict the content of the source act, only add to it or explain it.
Used by: Service
[1..1] [M] classCode (CS {CNE:ActClass } ) { Fixed="OBS" }
Indicates that this is an Observation.
[1..1] [M] moodCode (CS {CNE:ActMood } ) { Fixed="EVN" }
Indicates this is an Event.
[1..1] [M] code (CV {CNE:TextType } ) { Fixed="SupportingText" }
A code from the shown vocabulary indicating the nature of the supporting information.

The Coded Plain flavour of the Coded Value (CV) datatype shall be used to carry this information.
[1..1] [M] value (ST)
The supporting text.